Welcome to BRC West Indies Limited

Fasteners should be made of a similar material to ensure that they last as long as the roofing material Itself


Reinforcing steel bars should be bent around a circular former that has a minimum diameter equal to five times (5x) the bar diameter


Permaclad® and Colourclad® products should not be used in agricultural environments as corrosion resistance may be diminished by contact with animal waste and chemical sprays


We offer Financing / Credit Terms to qualified individuals


One of the first considerations when contemplating construction should be to conduct site tests to determine the quality of the substrate for the foundation - cores should be drilled 10-16ft into the rock to determine the depth to solid rock


Permaclad® and Colourclad® materials should only be cut with an electric shears or by hand with a metal scissors


Construction and reinforcement connections must be adequate and consistent from foundations to roof covering; the structure is as strong as its weakest link.


We offer a 5 Year Warranty on roofing installations


When preparing foundations for construction, do not excavate to rock and then fill with marl – build on the rock!


Permaclad® has a high reflective value, helping to keep your home cooler.


Freight services are available to transport your purchases


Settlement effects can ruin what would have been an ideal foundation – Brickforce® masonry reinforcement will resist cracking and ensure strong and healthy walls


We offer Installation Services for Roofing, Shutter and Eave Guttering products


When starting a construction project, digging the Septic or Drainage Well first can give a good indication of fractures and voids in the site's substrate / foundation rock


Special Discounts are available to BARP Members and to select Credit Union Members


Columns should be connected to beams with bent Rebar from one member into the other


U-Panel roof cladding should be fastened in every pan (6" centers) at the ridge and eave


Vertical steel reinforcement is required adjacent to openings (e.g. windows & doors) to prevent cracking and the potential collapse of walls


Cash On Delivery purchases are available for standard products


Never use a chop saw or angle grinder to cut Permaclad® & Colourclad® materials as this will lead to premature corrosion


Honey-combing in poured concrete appears as a rough, pitted surface resulting from incomplete filling of the concrete against the formwork. The root cause is often the use of too stiff a concrete mix or failure to vibrating it sufficiently after it is poured


BRC Roof Zips® screws are up to 23% stronger that the commonly used 10 gauge roof screws


Concrete cover is the minimum thickness of concrete between the reinforcing steel and the outer surface of the concrete. Pay very close attention before pouring concrete as insufficient cover may result in the corrosion of the steel, damage to the concrete and potential failure of the structure


Permaclad® roofing materials can be painted immediately after installation


The resistance of Permaclad® to atmospheric corrosion is 2-6 times greater than that of galvanized coated steel - Permaclad® just lasts longer!


The minimum lap-length for Reinforcing Steel Bars should be fifty times (50x) the diameter of the largest bar in the lap